(click on image above to stop scroll and enlarge images)

SOUTHERLY 115 Mk III

Details

Model: Southerly 115 Mk III
Model Year: 2001
Tax Status: Paid
Location:
Chichester, West Sussex
Boat Ref: 3736114
Status:
UNDER OFFER

Tax: Paid


Price: £99,500

Engine

Make: Yanmar
Model: 3JH2
Fuel: diesel
Power: 40 kW
Propeller: 3 Blade,
Bronze

Tankage

Fuel: 40 gallons
Water: 50 gallons

Dimensions

LOA:  11.25m (36'11")

LWL:  8.38m (27'6")
Beam: 3.62m (11'11")
Disp'ment: 6,900kg 
Ballast: 3,445kg
Keel Type: Lifting Keel
Draft Min: 0.69m (2'3")
Draft Max: 2.45m (8'1")

A fine example of the ever popular Southerly 115 introduced in 1983, this being a 2001 built series 3 model. With a large centre cockpit and spacious accommodation below, we highly recommend a viewing.

MANUFACTURER PROVIDED DESCRIPTION

The Southerly 115 embodies the established features of the Southerly range, which have proved popular over many years. The hull and rig set high standards of performance and versatility which appeals to family and cruising yachtsmen alike. 

CONSTRUCTION

HULL

Hull and superstructure are heavy duty GRP hand laid GRP mouldings, with clear gelcoat underwater, which is then antifouled. In the hull, woven roving and chopped strand mat are used in combination with thickness increasing progressively towards the keel area. There is a balsa core in the topsides which stops above the waterline. The deck is of sandwich construction using balsa core stiffening, with plywood in high stress areas where fittings are positioned. Bulkheads are glassed in the entire deck is bonded to the hull resulting in a strong and integral unit. A teak rubbing strake is fitted externally. Interior joinery is of Teak faced plywood with solid teak trims, build onto GRP base modules which are glassed into the hull.

  • Hull colour: Off White

  • Deck colour: Off  White

  • Boot Top line: Blue

  • Style lines: Blue

VARIABLE DRAFT KEEL

The cast iron grounding plate is bolted into a recess in the hull, using stainless steel bolts. It acts as transverse stiffening in way of the keel slot and protects the hull when taking the ground. The aerofoil swing keel is cast iron with a stainless steel pivot fitting into a substantial boss at the forward end of the ground plate. The swing keel is raised by an electrically operated hydraulic ram, with manual backup, which is attached to the keel by a pulley system. It can be operated from either the cockpit or the chart area. A keel locking pin is provided.

Variable draft is achieved by raising and lowering the blade with an electrically driven pump, fitted with a manual back-up. All hydraulics are easily accessible for maintenance. The keel control is fitted at the helm pedestal with a gauge showing the keel position. A removable stainless steel pin enables the keel to be locked in the “up” position.

ENGINE

  • Yanmar 3JH2 40Hp 3 cylinder 4 stroke marine fresh water cooled diesel with reduction/reverse gearbox is fitted

  • A marine electrical system with 55amp alternator is fitted

  • Hot water is heated from the engine via a calorifier tank

  • Bronze stern tube, with water lubricated stern gland

  • Bronze three bladed propeller

  • Ambassador AM10 rope cutter fitted to shaft

  • Stainless steel fuel tank , approx. 40 gals, with sediment trap, fuel level gauge and line filter

  • Bronze water inlet with large strainer

  • Sound insulation in engine compartment

  • Single lever engine controls both in cockpit and wheelhouse

  • Extractor fan in engine compartment

 

BOWTHRUSTER

  • 6hp Sleipner bow thruster with joystick control fitted at steering pedestal

 

ELECTRICS

  • Three Heavy duty 12V batteries are fitted with independent isolating switches, one for engine and two for domestic, stored in a purpose made vented box under the galley floor

  • Charging is via the engine alternator

  • Battery state meter

  • Full cabin light

  • Full navigation lighting, with combined steaming and flood light on mast and tricolour with all round white at masthead

  • Switch panel at chart table with circuit breakers to protect systems

  • 240V ring main including 3 double outlet sockets, earth leak circuit breaker and shore power connection cable 240v 1kW immersion fitted to calorifier

  • Sterling battery charger 30 amp (via shorepower)

  • Sterling charge booster system fitted to alternator

  • Sacrificial anode on hull connected to engine and sterntube

  • 12V interior socket (Cigarette lighter type)

ENGINEERING

  • Eberspacher D3LC heating system with four outlet, one each in aft cabin, heads, saloon and fwd cabin Greyline 80ASU front opening refrigerator in galley

  • Microwave fitted to aft galley bulkhead

  • Flatscreen TV with Glomex TV antenna

  • Stereo unit with 2 speakers in saloon and 2 speakers in cockpit

FRESH WATER 

  • A stainless steel tank with a capacity of 50 gallons approx. is situated under the port settee

  • An electric pressure system pumps hot and cold water with the galley and washbasin

BILGE PUMP 

  • A manual bilge pump is fitted in the cockpit, piped from the bilge sump to a hull discharge

 

ELECTRONICS & NAVIGATION

  • Autohelm ST60+ Speed depth and wind instruments, mounted in pod over companionway with multi-repeater unit at chart table

  • Autohelm autopilot with Whitlock Mamba rotary drive with twin station controls, ST6000+ display in cockpit, ST6000+ display at chart table

  • Simrad RD68 VHF, with masthead antenna with hawk feathers, and external VHF speaker

  • Raytheon radar/plotter system

  • ICS Navtex unit

STEERING

  • The cockpit wheel is pedestal mounted.

  • The rudder is a GRP moulding protected by a shoe to facilitate beaching or sailing in shallow water.

  • An emergency tiller is provided

 

MAST & RIGGING

  • The mast and boom are in anodised aluminium alloy with stainless steel and allow fittings.  The mast is a double spreader rig with single line reefing fitted to the boom

  • Rigging is of 1 x 19 stainless steel wire with swaged end fittings and stainless steel rigging screws

  • Furlex headsail reefing system is fitted

  • Spinnaker pole

  • Vertical mast stowage for spinnaker pole

  • The Genoa halyard is controlled from the mast

  • The main halyard and reef lines lead aft to the cockpit to Lewmar winches

 

SAILS

  • Fully battened mainsail

  • Stackpack system for mainsail with three part lazy jacks to mast Furling Genoa

  • Cruising chute

COCKPIT

  • Cave lockers in coamings

  • Large cockpit locker with access to drained gas bottle stowage

  • 30” stainless steel destroyer wheel on pedestal with binnacle compass

  • Single lever engine controls (with second set adjacent to inboard steering position) Teak laid cockpit seats, coamings and aft deck.

  • Teak grating on cockpit side

  • 2 x 2” Cockpit drains

  • Cockpit cushions, blue

  • Sprayhood and cockpit canopy

DECK GEAR & LOOSE EQUIPMENT

  • Genoa sheet tracks with genoa cars and control lines

  • Lewmar 44ST genoa sheet winches

  • Lewmar 30ST mainsheet winch

  • Lewmar 8 winch on coachroof

  • Adjustable mainsheet traveller with control lines and rope clutches on coachroof Horizon1500 12v 1000W reversing windlass, with hand held control

  • Anchor with 30M chain and 30M warp

  • Mooring warps

  • Fenders and tails

  • Ensign staff and ensign

  • Boat hook

  • Sprayhood

  • Fore, aft and midship mooring cleats

  • Stanchions and double lifelines

  • Gates in lifelines port and starboard

  • Stainless steel pulpit and split pushpit

  • Bow roller fairlead incorporating stowage for anchor

  • Furlex roller furling headsail gear

  • Transom boarding platform with stainless steel ladder

WINDOWS, HATCHES AND VENTILATION

  • Lewmar hinged opening deck hatch forward, fitted with roller blind and flyscreen

  • Main companionway hatch in acrylic on slides, with garage housing

  • Lewmar hinged opening deck hatch in aft cabin with roller blind and flyscreen

  • Opening portlight windows in aft cabin and passageway

  • Dorade vent over saloon

  • Ventilators in toilet and galley

  • Two small opening hatches over the galley and chart table

  • All other windows are fixed tinted acrylic panels  except the forward facing wheelhouse windows which are toughened glass. The hull and wheelhouse windows are recessed into the GRP mouldings

INTERNAL JOINERY & UPHOLSTERY

  • Internal joinery is in solid American Cherry with matching marine quality faced plywood

  • Lining are fabric covered plywood or GRP mouldings as appropriate

  • Cabin soles are teak striped non-slip laminate panels

  • Galley worktop: Gemini

  • Heads counter: Blue Sand

  • Concertina blinds fitted to saloon coachroof windows

  • Curtains fitted to portlights, Jab Fresco 1-6145-773

  • Upholstery: Saloon - Avalon 207 Evergreen, Fore and aft cabins - Covertex Lambada LAM47 Harmony, Navigator seat - plain beige

ACCOMMODATION

The layout is in accordance with the general arrangement drawing, There are a total of 7 berths, two in the forecabin, two in the aft cabin and three in the saloon (a double berth settee/table conversion and a single settee

GALLEY
  • Located to port in the wheelhouse, the galley has a single sink with drainer, and hot and cold pressurised water

  • The work surface is moulded in green Nordstone granite fished gelcoat

  • Stainless steel galley sink

  • A gimballed gas cooker with fiddles, two burners, grill, and oven with fail safe on all burners

  • Top loading ice box fitted to worktop

  • Cutlery drawer, crockery stowage together with cupboards for utensils and food

  • The floor is teak and holly stiped plywood with non-slip varnish

 

SALOON

  • Adjustable height table, which converts the dinette into a double berth, if fitted to the portside, the table extends to starboard to maximise seating

  • There are lockers under the dinette with a shelf outboard and stowage behind

  • A settee/berth is opposite the dinette with a shelf outboard and stowage behind

  • Teak shelves run both sides of the saloon above the four hull port.

  • The floor is teak and holly striped plywood with non-slip varnish

  • Blinds fitted to raised coachroof windows

 

NAVIGATION AREA

  • Located to starboard in the wheelhouse, that chart table has storage under and a hinged extension piece

  • The console for instruments is fitted across the front of the chart table and outboard

  • The inside steering position has a removeable stainless steel wheel

  • The helmsman seat if fitted with a stainless steel grabrail and a large hanging locker under

  • A windscreen wiper is fitted on the starboard window

 

FORE CABIN

  • Two full size overlapped berths with stowage under, with access to the chain locker forward

  • Two lockers forward, under the foredeck

  • Shelf along portside above berth

  • Opening Lewmar hatch gives access to the foredeck

  • Two portlights with rail and curtains are fitted in the hull

  • Folding door between the cabin and the main saloon

 

HEADS

  • The toilet compartment is to starboard with a marine WC

  • Holding tank system fitted

  • Washbasin with pressurised hot and cold water and shower

  • Basin and surrounds are finished in green Nordstone granite finished gelcoat

  • Stowage lockers

  • Mirror and glass holder

  • Teak shower grating in the floor

  • Separately switched shower drain pump to drain shower tray

  • Oilskin hanging space adjacent to toilet compartment

 

WALK THROUGH TO AFT CABIN

  • The passageway to the aft cabin has a hanging space aft and general stowage space forward

  • There is purpose made stowage for the table extension piece and the double berth infill

  • There is access to the engine compartment via two large removeable panels and doors at either end of the walkthrough between the galley and the aft cabin

AFT CABIN

  • There is a large cabin aft with two large single berths with and infill to form a double

  • There are three overhead lockers aft

  • A hanging locker is fitted to port with drawers and a vanity table

  • A small desk is fitted to starboard with shelves above and stowage under the opening top

  • An opening hatch gives access to the aft deck and the opening coaming windows and hull windows are fitted with curtains.

  • The floor finish is carpet with access to the stern tube under

 

MAINTENANCE

  • New standing rigging 2013 New running rigging 2013 New guardwires 2015

  • New seacocks fitted June 2020 Engine serviced annually

DISCLAIMER

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Northshore Shipyard, Itchenor, Chichester, West Sussex PO20 7AY Email: sales@northshore.co.uk

Tel: +44 (0) 1243 512611

  • Facebook - White Circle
  • Twitter - White Circle